Beger Water Block Primer B-3100
เบเยอร์ วอเตอร์ บล็อก บี-3100
เบเยอร์ วอเตอร์ บล็อก บี-3100 Beger Water Block Primer B-3100เบเยอร์ วอเตอร์ บล็อก บี-3100 สีรองพื้นปูนอเนกประสงค์ ทนชื้นสูง 75%สีรองพื้นอเนกประสงค์ทนชื้นสูง เกรดอัลตร้าพรีเมียมตัวใหม่ล่าสุด ที่ถูกพัฒนาให้สามารถทนทานต่อความชื้นได้สูงที่สุดเท่าที่เคยมีมา ด้วยเทคโนโลยีขั้นสูง วอเตอร์ พาวเวอร์ บล็อก (Water Block Power) ที่บล็อกความชื้นได้สูงสุดถึง 75% เหมาะสำหรับพื้นผิวปูนทุกประเภท ทั้งปูนที่ฉาบเสร็จใหม่ ผนังปูนเก่า หรือพื้นผิวปูนหลัง ฝนตกได้ทันที นอกจากนี้ยังมีเนื้อสีขาวยึดเกาะและกลบมิดพื้นผิวดีเยี่ยม มีคุณสมบัติป้องกันเชื้อรา ตะไคร่น้ำ การเกิดคราบด่าง คราบเกลือ ปัญหาสีโป่งพอง ลอกล่อน ได้อย่างเต็มประสิทธิภาพคุณสมบัติสีรองพื้นอเนกประสงค์ทนชื้นสูงสุด เกรดดีที่สุดจากเบเยอร์สูตรน้ำมัน : เนื้อฟิล์มสีขาวพื้นที่การทา : 35-40 ตร.ม./แกลลอน/เที่ยวสามารถใช้งานได้ทันทีหลังการกวนให้เข้ากัน หรือสามารถผสม เบเยอร์ ทินเนอร์ M-15 ไม่เกิน 5% ได้
- ทนความชื้นภายนอกได้สูงสุดถึง 75% จึงสามารถทาหลังฝนตกได้ทันที
- สามารถทาได้ทั้งพื้นผิวปูนใหม่ ปูนเก่า ปูนสด และปูนเปียก
- ฟิล์มสีหายใจได้ ช่วยป้องกันปัญหาสีโป่งพอง ลอกล่อน
- เนื้อฟิล์มสีขาวช่วยกลบพื้นผิวและสามารถเช็กงานได้ง่าย
- ช่วยป้องกันด่างและคราบเกลือจากปูน
- ช่วยป้องกันเชื้อราและตะไคร่น้ำ
- สามารถใช้กับผนังปูน ผนังคอนกรีต ผนังก่ออิฐปูนฉาบ คอนกรีตสำเร็จรูป แผ่นไฟเบอร์ซีเมนต์ได้
ขั้นตอนการใช้ผลิตภัณฑ์ขั้นตอนที่ 1 การเตรียมพื้นผิวพื้นผิวปูนเปียก : ปูนเปียก คือปูนที่ฉาบเสร็จใหม่อย่างน้อย 12 ชั่วโมง หรือพื้นผิวหลังฝนตก โดยเมื่อค่าความชื้นไม่เกิน 75% ให้ทำความสะอาดพื้นผิว แล้วจึงลงมือทารองพื้น พื้นผิวปูนสด : ปูนสดคือปูนที่ฉาบเสร็จใหม่อย่างน้อย 24-48 ชั่วโมง โดยเมื่อค่าความชื้นไม่เกิน 75% ให้ทำความสะอาดพื้นผิว แล้วจึงลงมือทารองพื้นพื้นผิวปูนใหม่ : กรณีเป็นปูนใหม่ ที่ฉาบเสร็จแล้วมาอย่างน้อย 30 วัน ให้ทำความสะอาดพื้นผิว ไม่ให้มีฝุ่นละออง คราบไขมัน แล้วจึงลงมือทาสีรองพื้นพื้นผิวปูนเก่า : กรณีเป็นปูนเก่า หรือผนังปูนที่เคยทาสีมาก่อน ให้ทำความสะอาดพื้นผิวให้ปราศจากคราบฝุ่น แล้วจึงค่อยลงมือทาสีรองพื้นขั้นตอนที่ 2 ทาสีรองพื้นกวนสีรองพื้น เบเยอร์ วอเตอร์ บล็อก ไพรเมอร์ ให้เข้ากันและสามารถทาได้เลยกรณีต้องการผสมทินเนอร์สามารถใช้ เบเยอ์ ทินเนอร์ M-15 ผสมได้ในอัตราส่วนไม่เกิน 5% จากนั้นทิ้งให้แห้งอย่างน้อย 2 ชั่วโมง แล้วจึงทาสีทับหน้าที่ต้องการตามระบบ ขอแนะนำให้ใช้คู่กับสีทับหน้าคุณภาพสูง เบเยอร์คูล ไดมอนด์ ชิลด์ 15 และ เบเยอร์คูล ไดมอนด์ ชิลด์ พลัส

Beger Water Block Primer B-3100
Ultra premium solvent-based multipurpose primer for exterior and interiorWith Water Block Power technology. the latest ultra-premium multipurpose primer has developed to resist moisture at a maximum of 75%. It is suitable for all surfaces, including fresh concrete, old concrete, or wet concrete after the rain. Its white pigments offer excellent adhesion and hiding coverage. Beger Water Block Primer also provides resistance and protection against peeling. blistering. efflorescence, alkali, fungi, and algae.FeaturesThe best multipurpose primer with excellent moisture resistance from BegerFilm Type : Matt White Solvent-basedApplication Area : 35-40 sq.m./gallon/coatUse after stirring thoroughly or mixing with Beger Thinner M-15 for up to 5%
- Moisture resistance at a maximum of 75%. Applicable immediately on the surface after the rain
- Suitable for fresh, old, new, and wet concrete.
- Breathable film, eliminating peeling and blistering.
- Matt White film, providing excellent hiding coverage.
- Efflorescence and alkali resistance.
- Fungus and algae resistance
- Application for concrete masonry, brick wall, precast concrete, and fiber cement board.
Direction of UseStep 1 Surface PreparationWet Concrete : Wet concrete refers to freshly plastered concrete for at least 12 hours or soaked concrete after rian. Concrete with a moisture of 75% should be cleaned before applying a primer.Fresh Concrete : Fresh concrete refers to freshly plastered concrete for at least 24-48 hours. Concrete with a moisture of 75% should be cleaned before applying a primer.New Concrete : New concrete at least 30 days should be cleaned and removed dust and grease before applying a primer.Old Concrete : old concrate or painted concrete should be cleaned and removed dust before applying a primer.Step 2 Applying PrimerThoroughly stir Beger Water Block Primer before applying. Mixing with Beger Thinner M-15 is optional but should not be mixed exceeding 5%, then leave it to dry for at least 2 hours before painting with high-grade paint such as Begercool DiamondShield 15 or Begercool DiamondShield Plus.