JBP Supreme Primer (Platinum Grade Primer for Fresh and Old Concrete Water Based) No.2900 Description : A special quality water-based formula primer for cement. made from high quality protect-resin acrylic with the technology from france. It offers extra protection against moisture (70% from exterior temporary moisture and 25% moisture that is gathered within the soil). The breathable color film helps eliminate moisture more effectively. The deeply absorbed white texture helps covering up the surfaces, making it easier to apply the topcoat. It is light scented and low VOCs and is safe for users and homeowners.
Feature :
Anti-fungal and moss
Breathable film
large amount of pigment, good coverage
Strong adhesion and anti-flaking.
Protect the film from salt stain.
Large amount of paint, cover the vast area
Type
: Platinum Grade Primer for Fresh and Old Concrete
Water Based
Surface
: Stucco, concrete, brick, gypsum board, asbestos
cement sheet
Appearance
: Flat white Finishes
Packaging
: 3.5 Liters.
: 8.75 Liters.
Recommended Topcoat
: JBP Acrylic For Emulsion
Cleaning Solvent
: Water
Application Mixing ratio
: Brush (Water by volume 0-5%)
: Roller (Water by volume 0-5%)
: Spray (Water by volume 5-10%)
Suaface Preparation : New Surface
Clean the surface Until Free from dust, cement, dirt and grease with clean cloth and water or detergent then leave the surface dry at least 1 month. Allow enough time for the surface to dry completely.
Old Surface
Remove all deteriorated, loose, chalky old paint. Do not use wire brush due to it would cause corrosion. For fungi and algaae infested area. it should be scrubbed with JBP MouldWash then leave it dry for 3 hours and no need to rinse off. Cracks on surface must be filled up with appropriate caulking compound