Product Description : Made from a special synthetic acrylic resin designed for protection. Moisture from concrete, cement and asbestos wall materials, smartboards and precast wall is suitable for use in areas where humidity inside and outside is the main cause of paint peeling problems. Stains, including mold stains Able to adhere on wet wall or high-moisture materials with excellent moisture retention and protection against mold It has a higher service life than the general primer system, as well ashelping to enhance the face to have better adhesion.
It is a special moisture resistant primer. Better adhesion than common primer.
Prevents paint peeling from moisture problems.
Can be applied on materials with high humidity
100% salt resistant
Feature : Lotto OneStop Primer U-999 creates two layers of colored film to fight and prevent moisture on the material surface. The first layer of film acts as a reflection. Less dense moisture returns to the surface. The second layer of film will filter the moisture to loosen slowly. In areas where the moisture content is so dense that the first layer of film cannot protect it. to reduce the problem of blistering of the topcoat.
Step1 :Preparing the floor
New cement surface : Bring the lantern or plot to clean the surface without any dust, cement or grease stains attached.
Old cement surface :
In the case of old cement floor Peel the old paint as clean as possible to the surface layer of cement. (Cleanliness affects the adhesion of the topcoat)
Check the surface condition for cracks. or how much deterioration to fix the structure first Wait a few hours for the solution to settle on the surface.
Fill the cracks of the mortar with a width of not more than 1 mm. with a lotto acrylic filler. and then paint according to step 2.
Step 2 : Paint in the designated area.
Bring Lotto One Stop Primer mixed with thinner hachem No.22 volume 10-20% depending on the tools used
Should choose the right equipment for the type of work
Stir the paint and thinner together. Incase of incomplete use, separate mixing containers should be used.
Paint in the desired area for 1 coat, make the same white film.
Allow the paint film to dry for 2-3 house before applying the topcoat.