DENSO WoodStain Special paint for wood. Gives a translucent color film with a beautiful sheen. Show the wood pattern clearly. High durability, wood color does not fade or deteriorate when exposed to sunlight due to anti-ultraviolet radiation. not applicable to all kinds Whether it's hardwood or soft. Can be applied both inside and outside such as walls, frames, doors, windows, balcony railings (except floors). Prevent water seeping into the wood. and can cause the wood to spit out moisture There is no problem with the paint film peeling off, cracking, blistering. In addition, there is an anti-mold agent. The wood painted with DENSO WoodStain can withstand humidity, rain and dew very well. make the coated wood Longer service life
special properties of wood stain
transparent color film therefore unable to show the pattern clearly
The paint film is durable with Nano Z, which contains nano-sized particles, so it cannot penetrate deeply into the texture. Helps protect wood surfaces from climate change in the tropics.
Helps protect the wood from ultraviolet rays both UVA and UVB with Nano Absorber.
Protect the wood from fungi, moths, and termites very well.
surface preparation
new wood
Sand the wood with sandpaper. in order to completely remove the splinter of the wood
Clean wooden surfaces free from dirt.
In the case of alkali Wipe the sap clean with a thinner for wood stain.
old wood
If the paint film is very deteriorated, it must be scraped/peeled. neatly on the wooden surface
If the wood that was previously painted and stained the wood and the paint film is in quite good condition, scrub or rub with fine sandpaper and clean thoroughly.
In the case of using a paint remover The wooden surface must be thoroughly cleaned. Until there is no color stripping liquid. Otherwise, it will affect the peeling effect of the wood dye.
Applying paint over people's faces, both before use and during use Use a soft brush to apply along the splinter marks of the wood, apply at least 2 times without mixing thinner. If wanting to mix, use thinner for Denso wood stain about 5 - 10%. Wait for the first coat to dry first. So apply 2-3 coats after use. Wash the brush thoroughly.
Specifications Package size: 1 gallon and 1/4 gallon Dilution: No need to mix, can be used straight away. Except in very hot weather, should be mixed with thinner for DENSO wood stain about 5 - 10% Coverage rate: 70 - 80 sq.m./gallon/time Drying time: 2 - 3 hours dry to the touch Can be applied over 6 - 8 hours and can be dried for 36 - 48 hours * The drying time of the film also depends on the weather conditions.
Shades can be seen from the attached catalog picture. Notice under the picture if there is a red star is a special shade. If there is no red star, it is a normal shade. What shade does the customer choose? You can call or line to specify the shade.