MAXZO WOOD STAIN PREMIUM SEMI GLOSS For exterior and interior High quality products from England It is a wood stain to protect and preserve the wood. with a mixture of translucent pigments making it possible to show wood grain and add color to the wood beautifully With special properties to prevent UV radiation, intense color penetrates deep into the wood. Helps to prevent and prevent the wood from deteriorating or cracking easily. With special features - Contains a mixture of special pigments. Give the texture a translucent color. Show natural wood grain, beautiful and clear - Color film has special flexibility. Excellent adhesion to wood Prevent cracking from twisting of the wood. - Special pigments can reflect UV rays (UV GUARD) to prevent sunlight. Keep the wood from discoloring. - Prevents water from entering the wood Protects the wood from moisture, rain and dew, and the wood can still release moisture. Good wood - Contains a mixture of anti-termite, wood-eating insects and fungi, but does not harm users and residents - Easy to apply, dries quickly, no primer required Or any topcoat.
Usage:
Suitable for all types of woodwork. Both inside and outside, such as doors, windows, frames, eaves, laths, fences, pavilions, various wooden furniture, including Thai-style houses or LOGHOME-style houses.
Color film properties:
product information
color type
shade
color film characteristics
specific gravity
Viscosity (at 25°)
Paint texture (by volume)
Modified Alkyd Urethane
Choose from the catalog
semi translucent, shiny
0.90 - 1.00
50 - 55 Crab Units
30.50 - 40.00 %
usage information
how to apply
brush or sprayer
Dry film thickness
depending on the absorption and type of wood
area covering (Area that can be applied)
70 - 80 square meters/ 1 gallon/ 1 time
Drying time (at 30°)
Dry to the touch: 3 - 4 hours
Dry to recoat: 8 - 12 hours
Can be used dry: 2 - 3 days
Mixing before use:
can be used immediately without mixing thinner But if wanting to adjust the viscosity, mix thinner suitable for use about 5 - 10% (the above ratio is the average rate depending on the tools used). Stir the paint until homogeneous before applying. and keep people in between to keep the color smooth and consistent
Surface preparation : New wood - Sand and chamfer the wood to be smooth. If the wood contains rubber or oil, use thinner to clean and dry. Old wood - that has been painted or treated, use sand paper to sand the paint. original out reach the wood Wash, clean, leave to dry completely. Painting system: 1. Use a brush to dip paint, wipe damp, apply on the wood pattern one by one. Do not apply across the wood grain. Shouldn't be applied back and forth because it will make the color look dull. no wood grain 2. Apply at least 2 coats of MAXZO WOOD Stain SEMI GLOSS wood stain to allow the wood to emit moisture the best. Allow 8 - 12 hours for each coat of paint to dry completely, then apply over the next coat. Do not apply more than 3 coats because the color will look opaque and the wood pattern will not be seen . due to volatile substances in termite protection solution will make the wood stain not dry Instructions for use: Should try to apply in a small area first because the color shade will depend on the original color of the wood If you want a smoother finish, lightly buff with sandpaper before the final coat.