ก่อนใช้คนสีให้ทั่ว จึงทาด้วยแปรงทา , ลูกกลิ้ง หรือ เครื่องพ่น ไม่ต้องผสมทินเนอร์ ยกเว้น ต้องการปรับสภาพความหนืด คนเนื้อสีให้เข้ากันดี ทาสีรองพื้นปูนชนิดพิเศษทนความชื้นสูง Super Sef Extra Wet Primer จำนวน 1 เที่ยว
Maxzo SUPER SEF Extra WET Primer, new cement primer, special type, oil formula
The best of high humidity resistant primer. Specially produced for urgent work that needs to be painted immediately after re-plastering with a special resin from France that has anti-alkali and salt properties. from the inserted mortar to destroy the paint texture Helps to strengthen adhesion and prevent color fading, blisters, flaking or salt deposition. Immediate protection when applying new cement after leaving it to dry for only 2 days for exterior and interior applications. both new plaster and old plaster
Usage :
Suitable for all types of surfaces. Both new mortar with high humidity helps to collect work quickly Even in the rainy season where Pun is wet all the time and the old plaster is deteriorated. It's severe chalk dust, stopping all problems, especially the wall peeling off from moisture in one step. Extend the service life of the topcoat Instant protection, longer lasting than conventional primers.
Features of color film :
product information
color type
shade
color film characteristics
specific gravity
Viscosity (at 25°)
Paint texture (by volume)
modified resin
matt white
semi matt
1.23
80 - 85 Crab Units
4.20 Kg. / 1 USG
User information
how to apply
brush, roller, sprayer
Film thickness when paint is dry
100 - 150 microns
area covering (Area that can be applied)
35 - 40 square meters/1 gallon/1 time
Drying time (at 25°)
Touch dry: 15 minutes
Dry to recoat: 2 hours
Usable dry time : 8 - 12 hours
Mixing before use:
for brush or roller application. Do not mix with thinner But if using a sprayer depends on wind pressure However, if the air pressure is insufficient, it is recommended to mix 10 - 15% thinner to adjust the liquid consistency to suit the air pressure used.
Surface Preparation : New Mortar Surface : 1. If urgent work is needed. Can be applied immediately on newly plastered cement surfaces 2. Fill the cracks completely. And clean the surface to be free from dust, cement debris, old cement surfaces: 1. Areas with mold or algae. Must be scrubbed with a hypochlorite solution. 2. Leave to dry. Scrub the original paint that has deteriorated. Completely fill the cracks
Painting system :
Before using the color people all over. Then apply with a brush, roller or sprayer. Do not mix thinner, except for adjusting the viscosity. Stir the color together well. Apply 1 coat of Super Sef Extra Wet Primer, a special cement primer resistant to high humidity.