MAXZO 100% ACRYLIC EMULSION For EXTERIOR & INTERIOR
For exterior and interior high quality watercolor Made from 100% premium grade acrylic. Accredited quality standard TIS. 272-2549 from the Bureau of Industrial Product Standards. Provides better surface protection than conventional water-based paints. With special features - beautiful color for a long time with high quality color powder (UV Protection) that prevents UV rays and reflects heat radiation, so the color is beautiful for a long time - resistant to the sun, rain and weather in tropical cities To protect the surface from corrosion of toxic pollution. - Very easy to paint. With adhesion additives to make the paint film last longer than general high quality acrylic paints. - Contains ingredients to prevent mold and algae that often occur on the paint film . Harmless to users and residents Suitable for both exterior and interior decoration. on plaster, concrete, brick, flat tile surfaces or other surface having the same characteristics Recommended for homes and buildings that require long-lasting coverage.
Features of color film :
product information
color type
shade
color film characteristics
specific gravity
Viscosity (at 25°)
Paint texture (by volume)
100% real acrylic
Choose from the catalog
smooth surface
1.35 - 1.40
105 - 107 Crab Units
50.00 - 54.00 %
usage information
how to apply
Dry film thickness
area covering (Area that can be applied)
Drying time (at 30° C)
Brush, roller or sprayer
35 - 40 microns
35 - 40 square meters / 1 gallon / 1 trip
Touch dry: 30 minutes
Dry to recoat: 1 - 2 hours
Dry time: 3 - 4 hours
Mixing before use:
mix with clean water 20-25% by volume (the above ratio is the average rate). Mixing with water must be done when wanting to adjust the viscosity to be suitable for use, temperature and humidity conditions.
Surface preparation:
New cement surface - Leave the wall to dry completely for at least 1 month. Clean it from dust, cement debris and grease. Old cement surfaces - Scrub the original paint that has deteriorated completely (do not use a wire brush). Areas with mold or algae must be scrubbed with hypochlorite solution. (White laundry detergent) if there are cracks. should be repaired Wash and leave to dry for 2-3 days.
Painting system:
New plaster surface - apply primer. New anti-alkali primer paint MAXZO mixed with clean water, amount 1 coat. Old cement surface - Apply a primer. Old cement primer MAXZO CLEAR SEALER mixed with thinner MAXZO # 100, 1 coat. Topcoat painting - Apply 100% acrylic water-based paint MAXZO for exterior or interior, 2 coats, leaving the first coat to dry completely. first Therefore, paint over the next trip