MAXSHIELD NANO HYBRID Pure Acrylic100% Semi- gloss
For exterior and interior (Semi-gloss type) High quality acrylic paint. Made from 100% acrylic, ultra premium grade resistant to harsh weather conditions certified quality from the Bureau of Industrial Product Standards TIS 2321-2549 weather resistant paint first in Thailand that provides better surface protection than general premium paints with special features
>> special ingredients, nano glue silicone latex special small molecule glue The color film adheres to the surface more tightly than general paint >> Long lasting beautiful color with high quality pigment (UV Protection) that helps prevent UV rays and reflect heat radiation, so the color is beautiful for a long time >> Combined with German technology (Protective Hybrid Technology) to prevent stains, water Oil embedded in the paint film >> Paint film is smooth, washable, and self-cleaning by rinsing with water. Resists the adhesion of dust >> Waterproof paint, does not accumulate water and moisture. Thus helping to prevent the occurrence of mold and algae. Usage:
Ideal for large buildings, condominiums, hotels or luxury homes that require long-lasting coverage. Can be applied on surfaces such as plaster, bare concrete, bricks, flat tiles or other surface who require special beauty and durability
Features of color film :
product information
color type
100% genuine acrylic
shade
Choose from the catalog
color film characteristics
smooth and semi-gloss
specific gravity
1.05 - 1.15
Viscosity (at 25°)
105 - 110 Crab Units
Paint texture (by volume)
45.00 - 50.00 %
usage data
how to apply
Brush, roller or sprayer
Film thickness when paint is dry
35 - 40 microns
area covering (Area that can be applied)
35 - 40 square meters / 1 gallon / 1 trip
Drying time (at 30°)
Touch dry: 30 minutes
Dries to recoat in 2 - 3 hours.
Dries for 3 - 4 hours.
Mixing before use:
Mix with clean water 10-15% by volume (the above ratio is the average rate). Mixing with water must be done when you want to adjust the viscosity to be suitable for use. temperature and humidity conditions
Surface preparation:
New cement surface - Leave the wall to dry completely for at least 1 month. Clean it from dust, cement debris and grease. Old cement surfaces - Scrub the original paint that has deteriorated completely (do not use a wire brush). Areas with mold or algae must be scrubbed with hypochlorite solution (white laundry detergent). If there are cracks should be repaired Wash and leave to dry for 2-3 days.
Painting system: new cement surface - apply primer New cement primer to prevent alkali MAXSEALER mixed with clean water, amount 1 coat. Old cement surface - apply a primer with Old cement primer MAXZO CLEAR SEALER mixed with MAXO thinner # 100, 1 coat. Topcoat painting - Apply 100% acrylic water-based paint MAXSHIELD 2 coats, leaving the first coat to dry completely before applying. next trip