100% pure acrylic paint, super safe for exterior and interior use SUPER SEF 100% ACRYLIC EMULSION For EXTERIOR & INTERIOR, for exterior and interior use, high quality, beautiful, fresh, like new, resistant to all weather conditions in tropical cities - HYBRID ACRYLIC 100%, special fine acrylic adhesive Penetrates deep into the cement layer Provides excellent grip Solve the problem of color peeling off as dust. - High quality sunscreen color powder. Protects and resists UV rays and reflects heat radiation. long lasting fresh color Not easy to fade - smooth color film Excellent roundness with high quality TITANIUM, helping to cover the surface perfectly. Add smoothness to the color film. - Resistant to sunlight, rain, resistant to tropical weather. Reduce surface heat build-up allow the steam and heat accumulated in the cement layer Can evaporate through. - Prevents mold and bacteria. Resistant to moss formation Do not let the color film be destroyed. - Safe from mercury and lead Free from harmful volatile substances It is friendly to the environment and you. Usage : Suitable for decorating both exterior and interior of the building. on plaster, concrete, brick, flat tile surfaces or other surface having the same characteristics Features of color film :
product information
color type
100% genuine acrylic
shade
Choose from the catalog
color film characteristics
smooth surface, special side
specific gravity
1.50 - 1.60
Viscosity (at 25°)
108 - 113 Crab Units
Paint texture (by volume)
45.00 - 50.00 %
usage information
how to apply
Brush, roller or sprayer
Film thickness when paint is dry
35 - 40 microns
area covering (Area that can be applied)
35 - 40 square meters / 1 gallon / 1 trip
Drying time (at 30°)
Touch dry: 30 minutes
Dries to recoat in 1 - 2 hours.
Dries for 3 - 4 hours.
Mixing before use
Mix with clean water 20-25% by volume (the above ratio is the average rate). Mixing with water must be done when wanting to adjust the viscosity to suit the usage, temperature and humidity conditions. Surface preparation: new cement surfaces - allow the walls to dry completely for at least 1 month. Clean and free from dust, cement debris and grease. Old cement surfaces - Scrub the original paint that has deteriorated completely (do not use a wire brush). Areas with mold or algae must be scrubbed with hypochlorite solution. (White laundry detergent) if there are cracks. should be repaired Wash, clean and leave to dry for 2-3 days. Painting system: new cement surface - apply a primer. New cement primer, anti-alkali SUPER SEF mixed with clean water, amount 1 coat. Old cement surface. - apply foundation Old cement primer SUPER SEF SEALER CLEAR mixed with thinner, 1 coat. Topcoat painting - 100% Super Sef acrylic water-based paint for ceiling. Special matt type, 2 coats, leaving the first coat of paint to dry completely. Therefore, paint over the next trip