One compoment modified expoxy primer paint. A Fast drying epoxy ester primer and anti-corrosive pigment zinc- phosphate for anticorrosive primer on ferrous metal.
Fast dry can be apply topcoat in 2 hrs.
Excellent adhesion all ferrous & non ferrous metal.
Can be apply any topcoat eg. Alkyd epoxy polyurethane.
Application Area
As a primer offers excellent protection against corrosion in exposure.
Exhibits very good adhesion to steel structure , galvanized steel ,aluminium. Suitable for application structural steel ,machinery, piping and Excellent for use high quality shop primer.
FEATURES
Toa Rust-shield is one component modified epoxy primer paint. A fast drying epoxy ester primer and anti-corrosive pigment zinc- phosphate for anticorrosive primer on ferrous metal.
As a primer offers excellent protection against corrosion in exposure. Exhibits very good adhesion to steel structure, alloy, metal sheet, and stainless. It is suitable for application structural steel, machinery, piping and excellent for use high quality shop primer.
APPLICATION INFORMATION Surface Preparation For Structure Coating
Remover all oil, grease, dirt, oxide and other foreign material by cleaning per SSPC-SP1, Solvent Cleaning before coating.
To prevent the formation of rust or oxide, coat as soon as possible after cleaning. For maximum protection, the coating must have direct contact with the metal surface.
contaminants with a suitable solvent. Metal should be blast cleaned in accordance with NACE No.2 / SSPC-SP10, ISO 8501:1, SIS Sa 2.5 to a near-white finish using a suitable abrasive or hand tool cleaning in accordance with SIS St 2 or SSPC-SP2 .
Surface repaire (cracks, pores, holes) done with TOA Epoxy putty and polishing of surface with moltoprene disk.
Coating System
Protective Coating
Primer Rustshield Primer 50 x 1 micron
Topcoat Topguard 60 x 2 microns
Recommendation
The proper relative humidity in the work shall not exceed 85% RH.
The temperature of the substrate should be minimum 10 C and at least 3 ํ C above the dew point of the air , ํ temperature and relative humidity measured in the vicinity of the substrate for prevent moisture and water drop on substrate effective adhesion and drying time.
HANDLING AND STORAGE
Storage condition
The product must be stored in accordance with national regulations. Storage conditions are to keep the containers in a dry, cool, well ventilated space and away from source of heat and ignition.
Shelf life
24 months at 30-35 ํC
The product must be stored in accordance with national regulations. Storage conditions are to keep the containers in a dry, cool, well ventilated space and away from source of heat and ignition. Containers must be kept tightly closed.