TOA FLOORSEAL Waterproofing Cement: Highly flexible & 100% Waterproofing. TOA Floorseal is a one part ready-to-use cement with high flexibility for waterproofing and concrete protection.
100% Waterproofing
Flexible film, bendable, and excellently seal cracks
High adhesion without a need of primer
Safe & Free from toxic, aligned with standard of Waterworks Authority
Re-coating on old cement tile without dismantle
Both exterior & interior application
Can Size
4 KG., 20 KG.
Application Bathroom/Toilet floor, deck, balcony, basement, lift, swimming pool and roof top garden.
FEATURES
Toa Floorseal is a single component ready-to-use grey cement mortar made from cement, selected fine grain aggregates, special flexible polymers. Mix with water and apply on surface of concrete or mortar to prevent or solve the problem of leakage of the structure. Suitable for waterproofing, crack sealing and repair works. The mix can be easily applied by brush or trowel. It cures to give a flexible membrane and excellent adhesion to the substrate. It can be used as final coating, UV and water resistant.
APPLICATION SYSTEM Surface Preparation:
Substrate must be sound, free of loose or weak particles, dust and dirt. Oil and wax containing layers, as well as laitance must be completely removed.
Surface irregularities such as cracks or holes must be repaired before applying.
In case of mold and algae, brush and clean with Toa 113 Microkill then leave it dry for 24 hours before coating with Toa Floorseal.
The substrate must be thoroughly wetted down prior to the mortar application.
Mixing
Mix TOA Floorseal 20 kg. (1 bag) with clean water 7 litre. into a prepared container. Using a blender mixing with a low speed and mix for approx. 3 minutes until a smooth workable consistency is achieved. Allow the mixture to saturate for 1-2 minutes, adding TOA Floorseal or water to adjust viscosity when necessary and remix for maximum 2 minutes.
After mix TOA Floorseal, should use it within one hour or less, depending on weather conditions.
Application
Apply the first coat while the surface is still damp from saturation with an iron trowel or brush and leave to harden ( 2-3 hrs. ).
Apply a second coat of identical thickness at the rate 1.5 - 2 kg/ 1 m2/ 2 coat in across direction of the first coat.
Recommendation :
Stir well before use and once mixed, entire contents should be used.
Do not use TOA Floorseal during strong sunshine or on hot substrate to prevent cracks.
For areas expected to be cracked or existing crack ie. the corner between floor and wall. After apply the first coat reinforce with Toa Fibermesh while wet prior to apply the second coat.
Apply at least 2 coats, thickness not less than 2 mm.
For storage tank should be cleaned with water before use.
For bath rooms, swimming pool can be tiled after the second coat 7 days.
Mixing tools should be cleaned with water while material is still fresh.
Keep away from children and avoid contact with eyes
HANDLING AND STORAGE
StorageShelf life: Keep all containers well closed. Store in a dry cool place.