Toa Gloss Vanish T-9500 is suitable for all kinds of exterior & interior wood application. Paint film is smooth and high gloss. It protects wood from UV light and is highly resistant to any weather condition, prevent water penetration, fast-drying and light color to enhance beauty of natural wood texture/grain.
Suitable for wood structures such as house and boat, as well as furniture. Not recommended for wood flooring and wood stair.
Type of Finishing
Gloss
Can Size
1/4 GL., 1 GL.
Only 1st Trusted Choice of Wood Coating
For Over 40 Years
Paint film Thick, Fast dry and High gloss.
High concentration & High coverage.
High adhesion & No peel.
Prevent water penetration & Resistant to any weather condition.
Free from dangerous heavy metals Lead & Mercury.
FEATURES
Toa Varnish Gloss Exterior T-9500 is a high gloss varnish which suitable for interior and Exterior of all woodworks. The properties of this product are high gloss, excellent weathering resistance excellent waterproof,fast dry,high film build, good leveling, pale in color, protect and enhance the natural wood appearance. Toa Varnish Gloss Exterior #T9500 is suitable for the protection of interior and exterior wooden structures such as wooden house, wooden boat, wooden furniture and etc.
APPLICATION SYSTEM Surface Preparation
New surface
For coated wood or wood with old or peeling paint film or old wood with no coating.
Sand with abrasive paper to the wood surface.For coated wood which coating film still in good condition.
Sand over the painted film with TOA abrasive paper no. 240-320
then clean the surface to remove grease, dust, oil or dirt.
Old surface
1. Use TOA abrasive paper no. 240 – 320 to sand the wood surface until smooth.
2. Fill all wood crack and hole by filler.
3. Sand again until the smooth surface is obtained and clean the surface until no dust remain.
Coating system
Topcoat
Apply by brush with TOA Varnish Gloss Exterior T-9500 at least 3 coats
Recommendation
The temperature of the substrate should be minimum 10 ํC and at least 3 ํC above the dew point of the air, temperature and relative humidity measured in the vicinity of the substrate. Good ventilation is required in confined areas to ensure correct drying.
HANDLING AND STORAGE
Storage condition
The product must be stored in accordance with national regulations. Keep the containers in a dry, cool, well ventilated space and away from source of heat and ignition.