TOA Industrial Lacquer Primer ทีโอเอ รองพื้น สีพ่นอุตสาหกรรม สูตรน้ำ

• Low VOCs & Low odour with Green Technology.
  
• Easy to use, fast-drying and able to move in within 1 day.
  
• High coverage.
  
• Easy to apply Brush or spray.
• Free from dangerous heavy metals Lead & Mercury.

FEATURES

• Old surface
  • For coated wood or wood with old or peeling paint film or old wood with no coating. Sand with abrasive paper to the wood surface.For coated wood which coating film still in good condition. Sand over the painted film withTOA abrasive paper no. 240-320 then clean the surface to remove grease, dust, oil or dirt.
• New surface
  • 1. Use TOA abrasive paper no. 240 – 320 to sand the wood surface until smooth.
  • 2. Fill all wood crack and hole by filler.
  • 3. Sand again until the smooth surface is obtained.
  • 4. Clean the surface until no dust remain.

• Primer
  • Apply by brush or spray with TOA Industrial Lacquer Primer Waterborne at least 2 coats. (Recoatable time is at least 1 hours)
• Topcoat
  • 1. Apply by brush or spray with TOA Industrial Lacquer Waterborne Gloss at least 3 coats. (Recoatable time is at least 1 hours)
  • 2. Before topcoat any layer, TOA abrasive paper no. 320 – 400 are recommended to sand the surface which provide good intercoat adhesion and smooth the surface.

• The temperature of the substrate should be minimum 10 ํC and at least 3 ํC above the dew point of the air, temperature and relative humidity measured in the vicinity of the substrate. Good ventilation is required in confined areas to ensure correct drying.

• Storage condition
  • The product must be stored in accordance with national regulations. Keep the containers in a dry, cool, well ventilated space and away from source of heat and ignition. Containers must be kept tightly closed.
• Shelf life : 3 years.