Toa Industrial Lacquer is formulated from premium Nitro-Cellulose and special additives. These enhance paint saturation and concentration. Paint film is not easily faded and has excellent coverage and adhesion for long lifetime (Able to easily mix with color pigments)
Type of Finishing
Gloss, Semi-Gloss, Matt
Can Size
1/4 GL., 1 GL., 5 GL.
Support
High Concentration & Long-lasting Value to money
Strong paint film Bright color & Glossy.
Fast dry & High coverage.
High concentration & Mixed with thinner to give high coverage area.
Free from dangerous heavy metals Lead & Mercury.
Usage Area
Suitable for wood furniture made from real wood, plywood and MDF board such as cabinet, table and chair. Also, it can be applied on metal, plastic and decorative car parts.
FEATURES
TOA Industrial Lacquer are based on high quality Nitrocellulose Resin and Special Pigments. Properties of the products are fast dry, excellent hiding power and good adhesion on solid wood, MDF, metals and etc. TOA Industrial Lacquer is recommended for interior decoration that suitable for ply wood, MDF, solid wood and interior wood furniture.
APPLICATION SYSTEM Surface Preparation Old surface
1. Chalky surfaces or loose material must be removed by stiff brush.
2. The surfaces must be clean and free of dirt,wax,salt,old paint and other contaminants.
New surface
1. Use TOA abrasive paper no. 240 - 320 to sand the wood surface until smooth.
2. Fill all wood crack and hole by filler.
3. Sand again until the smooth surface is obtained.
4. The surfaces must be clean and free of dirt, grease, oil, wax, salt and other contaminants
Coating system Primer
Apply by brush or spray with TOA Lacquer Primer Surfacer # 0GRY at least 2 coats. (Recoatable time is at least 20 minutes)
Topcoat
Apply by brush or spray with TOA Industrial Lacquer at least 2 coats. Before topcoat any layer, TOA abrasive paper no. 320 – 400 are recommended to sand the surface
Recommendation
The temperature of the substrate should be minimum 10 ํC and at least 3 ํC above the dew point of the air, temperature and relative humidity measured in the vicinity of the substrate. Good ventilation is required in confined areas to ensure correct drying.
HANDLING AND STORAGE Storage condition
The product must be stored in accordance with national regulations.
Keep the containers in a dry, cool, well ventilated space and away from source of heat and ignition. Containers must be kept tightly closed.