TOA Clear Matt Lacquer T-5500 ทีโอเอ แล็กเกอร์ ชนิดด้าน T-5500

• High concentration & Mixed with thinner to give high coverage area.
• Fast-drying & Matt finishing.
• Flexible film Reducing crack.
• Transparent film & Highlighting wood texture/grain.
• Safe with European Standard EN71 Free from 8 dangerous heavy metals.

FEATURES

• Old surface
  • 1. Chalky surfaces or loose material must be removed by stiff brush.
  • 2. The surfaces must be clean and free of dirt,wax,salt,old paint and other contaminants.
• New surface
  • 1. Use TOA abrasive paper no. 240 - 320 to sand the wood surface until smooth. 
  • 2. Fill all wood crack and hole by filler.
  • 3. Sand again until the smooth surface is obtained.
  • 4. The surfaces must be clean and free of dirt, grease, oil, wax, salt and other contaminants.

• Apply by brush or spray with TOA Lacquer Sanding Sealer # T-5555 at least 2 coats. (Recoatable time is at least 20 minutes)

• 1. Apply by brush or spray with TOA Lacquer Gloss # T-5000 at least 2 coats. (Recoatable time is at least 30 minutes)
• 2. Apply by brush or spray with TOA Lacquer Matt # T-5500 at least 1 coat. (Recoatable time is at least 20 minutes)
• 3. Before topcoat any layer, TOA abrasive paper no. 320 – 400 are recommended to sand the surface which provide good intercoat adhesion and smooth the surface.

• The temperature of the substrate should be minimum 10 ํC and at least 3 ํC above the dew point of the air, temperature and relative humidity measured in the vicinity of the substrate. Good ventilation is required in confined areas to ensure correct drying.

• Storage condition
  • The product must be stored in accordance with national regulations.
  • Keep the containers in a dry, cool, well ventilated space and away from source of heat and ignition. Containers must be kept tightly closed.
• Shelf life : 2 years (from manufacturing date)