Shark WoodStain Plus Gloss สีย้อมไม้ ปลาฉลาม วู้ดสเตน พลัส ชนิดเงา

• Translucent paint film & Highlighting wood texture/grain appearance by Transparent Pigment.
• With UV Absorber, preventing wood from UV light.
• Flexible film No crack, blister and peel.
• Easy to wash.
• Anti-bacteria.
• Free from dangerous heavy metals Lead & Mercury.

FEATURES

• Old surface
  • For coated wood or wood with old or peeling paint film or old wood with no coating.
  • Sand with abrasive paper to the wood surface.For coated wood which coating film still in good condition.
  • Sand over the painted film with TOA Abrasive Paper No.240-320
  • then clean the surface to remove grease, dust, oil or dirt.
• New surface
  • 1. Use Toa abrasive paper no. 240 – 320 to sand the wood surface until smooth.
  • 2. Fill all wood crack and hole by filler.
  • 3. Sand again until the smooth surface is obtained.
  • 4. Clean the surface until no dust remain.

• Primer
  • Apply by brush with TOA Wood Preservative 1 coat. (Recoatable time is at least 30 minutes)
• Topcoat
  • 1. Mixing ratios between Shark Wood Stain Gloss and Toa Thinner No.21 are 5 : 1 for first coat and 10 : 1 for second and third coat, respectively.
  • 2. Apply by brush with Shark Wood Stain Gloss at least 3 coats. (Recoatable time is at least 8 hours)
  • 3. Before topcoat any layer, Toa abrasive paper no. 320 – 400 are recommended to sand the surface which provide good intercoat adhesion and smooth the surface.

• The temperature of the substrate should be minimum 10 ํC and at least 3 ํC above the dew point of the air, temperature and relative humidity measured in the vicinity of the substrate. Good ventilation is required in confined areas to ensure correct drying.

• Storage condition
  • The product must be stored in accordance with national regulations. Keep the containers in a dry, cool, well ventilated space and away from source of heat and ignition. Containers must be kept tightly closed.
• Shelf life : 2 years.