TOA Aluminium Wood Primer ทีโอเอ สีรองพื้นไม้อะลูมิเนียม

• Excellently wood gum protection.
• Easy to apply Roll, brush or spray.
• Free from dangerous heavy metals Lead & Mercury.

FEATURES

• Old surface
  • 1. Chalky surfaces or loose material must be removed by stiff brush.
  • 2. The surfaces must be clean and free of dirt,wax,salt,old paint and other contaminants.

• New surface
  • 1. Use TOA abrasive paper no. 240 - 320 to sand the wood surface until smooth.
  • 2. Fill all wood crack and hole by filler.
  • 3. Sand again until the smooth surface is obtained.
  • 4. The surfaces must be clean and free of dirt, grease, oil, wax, salt and other contaminants.

• Primer
  • 1. Apply by brush or spray with Toa Aluminium Wood primer G1601 at least 1 coats.
    • (Recoatable time is at least 4 hours)
  • 2. Apply by brush or spray with Toa universal undercoat white G1600 at least 1 coats
    • (Recoatable time is at least 8 hours)
    • Remark - Repeat these two steps if tannin bleeding war upon the film of undercoat G1600
• Topcoat
  • Can be apply topcoat with Toa Enamel Paints or Supershield Timbershield.

• The temperature of the substrate should be minimum 10 ํC and at least 3 ํC above the dew point of the air, temperature and relative humidity measured in the vicinity of the substrate. Good ventilation is required in confined areas to ensure correct drying.

  *** สามารถติดต่อสอบถาม  083-2393626  ,  083-2396466   หรือ   LINE : @TOPAINTS *** 
  ราคาขึ้นอยู่กับเฉดสีแต่ละเฉด โปรดเลือกเฉดที่ต้องการ ได้ที่แคตตาล็อกด้านบน