TOA Wood Primer T-2000 Toa Wood Primer T-2000 is solvent-based primer, formulated from high quality vinyl resin. It is fast-drying, easy to wash and high absorption into wood, top coat and Nitro-Cellulose lacquer as well as Polyurethane (1K & 2K).
Type of Finishing
Transparent
Can Size
1 GL.
Excellent Wood Protection
Anti-mold Formation
Increasing adhesion between wood & top coat.
Replacement of Shellac.
High prevention from wood gum.
High prevention from wood burner leverage & Smooth film.
Enhancing top coat gloss.
Easy to use, without thinner needed.
Easy to apply & Fast-drying.
Free from dangerous heavy metals Lead & Mercury.
Transparent Wood Protection
Suitable for interior wood application as a primer for real wood and plywood with beautiful texture/grain such as parquet and wood furniture.
FEATURES Toa Wood Primer #T-2000 is based on Vinyl Resin. Properties of this product are fast dry, easy to sand, excellent penetration that provide good intercoat adhesion between wood surface and topcoat, can be topcoat with Nitrocellulose Lacquer, Polyurethane 1K and 2K Recommend for plywood, solid wood, interior wood floor, parquet and interior wood furniture
APPLICATION SYSTEM Surface Preparation
Old surface
The surface must be clean and free of dirt, grease, oil, wax, salt, old paint and other contaminants.
New surface
1. Use TOA abrasive paper no. 240 – 320 to sand the wood surface until smooth.
2. Fill all wood crack and hole by filler.
3. Sand again until the smooth surface is obtained.
4. Clean the surface until no dust remain.
Coating system
Primer
1. Apply by brush with Toa Wood Preservative 1 coat. (Recoatable time is at least 30 minutes)
2. Apply by brush with Toa Wood Primer #T-2000 1 coat. (Recoatable time is at least 1 hour)
Topcoat
Can be topcoat with TOA Nitrocellulose Lacquer or Toa Polyurethane 1K and 2K
Recommendation The temperature of the substrate should be minimum 10 ํC and at least 3 ํC above the dew point of the air, temperature and relative humidity measured in the vicinity of the substrate. Good ventilation is required in confined areas to ensure correct drying.
HANDLING AND STORAGE
Storage condition
The product must be stored in accordance with national regulations.
Keep the containers in a dry, cool, well ventilated space and away from source of heat and ignition. Containers must be kept tightly closed.