Advance technology , the best interior paint from TOA 100% high performance pure acrylic waterborne. Air detoxify technology absorbs harmful formaldehyde duration washable and anti-bacterial for lifetime.
Product Group
Ultra Premium
Type of Finishing
Semi - Gloss
Can Size
1 GL., 2.5 GL.
Support
Advance technology
The best interior paint from TOA
Superior wash-ability and scrub resistance more than 200,000 times.
Extra low odor and nearly zero VOCs.
Air detoxify technology absorbs harmful formaldehyde 24 hr.
Certified by Thai and Singapore green label standard.
Anti-bacterial for lifetime by Microban.
Approved by National Asthma Council Australia. A better choice for people with asthma & allergies.
French regulation and trend in Europe, concerning the emission level of volatile substances into indoor air showing as inhalation toxic hazard. DuraClean A+ is the 1st in Thailand and in Asia to get certified with A+ result. (very low emission or highest safe) Suitable for Green Building standard.
Natural material and 100% APEO
Safe for everyone
For interior, Suitable for areas that require highly hygienic ex. Children's bedroom, hospital, kindergarten or areas require extra low odor ready for moving in within an hour ex hotel, corridor.
FEATURES
Duraclean A Plus is an ultra pre mium grade,pure acylic. It provides an easy to clean function that leaves no stain after cleaning. It makes an air indoor quality the best by Air Detoxify techonology , which gives odourless and disposal of formaldehyde in air indoor. Moreover it gives long life prevention of bacteria over color coating with no harmful side effect to human being. Excellent fungus prevention with advance technology of Nearly Zero V.O.C.( Volatile Organic Compound ) It is highly recommended for children room , hospital, kindergarten, restaurant and hallway,etc
APPLICATION SYSTEM Surface Preparation
Old surface
Powdery and chalky surface must be scrubbed and cleaned with water
Fungus and mildew growth must be cleaned off before applying microkill. Left to dry for 2-3 days
Apply on cracks with TOA Acrylic Filler for the crack width < 1 mm. and not to crack continueously
Apply on cracks with TOA Acrylic Sealant for the crack width > 1 mm. and crack continueously
New surface
Substrate must be completely cured and dried ( ~ 1 month ) free from oil , grease , mildew , from release agents and foreign matters. or measure moisture which should be less than 14% on surface with protimeter mini If any crack , it should be repaired on surface before applying
Coating system
Primer For Old Surface
Apply 1 coat of TOA CONTACT PRIMER or SUPERSHIELD DURACLEAN CONTACT PRIMER (Water Base System)
Primer For New Surface
Apply 1 coat of SUPERSHIELD ALKALI RESISTING PRIMER
Topcoat
Apply 2-3 coats of SUPERSHIELD DURACLEAN A PLUS SEMI-GLOSS
** Recommend for deep tone , you should apply middle coat that it has tone lighter before requiringcolor