Toa ExtraCote Semi-Gloss ExtraCote is a high quality acrylic emulsion paint for both exterior and interior applications formulated by Super acrylic resin. It provides high durability in tropical weather conditions with excellent adhesion and fungus resistance and is perfectly safe for users and environment with no added lead and mercury.
Product Group
Medium
Type of Finishing
Semi-Gloss
Can Size
1GL, 2.5GL, 5GL
Support
High adhesion and resistant to every climate
Easy to clean and scrub resistance. UV and Heat Reflection. High adhesion and resistant to every climate. Good hiding power for easy to use and high coverage. Perfectly safe for users and environment.
Easy to clean and scrub resistance
Suitable for skimcoat substrate ,concreate , brick ,plaster and cement and etc.
FEATURES Extracote Semigloss for exterior and interior is the high quality 100% acrylic emulsion.Excellent durability and resistance to fungus attack alkali on plaster and wheathering.It issuitable for decoration and protection of all interior and exterior building surfaces.
Typical Use ;It is ideal for application to both concretes,new and old masonry surfaces,platers,bricks, asbestos shingles and siding.It is highly recommended for long lasting protection of building and housing.
APPLICATION SYSTEM Surface Preparation
Old surface
Powdery and chalky surface must be scrubbed and cleaned with water
Fungus and mildew growth must be cleaned off before applying microkill. Left to dry for 2-3 days
Apply on cracks with TOA Acrylic Filler for the crack width < 1 mm. and not to crack continueously
Apply on cracks with TOA Acrylic Sealant for the crack width > 1 mm. and crack continueously
New surface
Substrate must be completely cured and dried ( ~ 1 month ) free from oil , grease , mildew , from release agents and foreign matters.or measure moisture which should be less than 14% on surface with protimeter mini If any crack , it should be repaired on surface before applying
Coating system
Primer For Old Surface
Apply 1 coat of TOA CONTACT PRIMER
Primer For New Surface
Apply 1 coat of EXTRACOTE ALKALI RESISTING PRIMER
Topcoat
Apply 2-3 coats of EXTRACOTE SEMI-GLOSS
** Recommend for deep tone , you should apply middle coat that it has tone lighter before requiring color