Beger Aqua WoodStain สีเบเยอร์ ย้อมไม้สูตรน้ำเบเยอร์

 Product use process 

• 1.1 In case the wood has been painted before and the paint film peels off or it is an old wood that has never been painted before. To sand with sandpaper until the original wood. If it's new wood, sand it to remove excess wood burrs. then clean  The surface is free from grease, dust, oil or foreign matter.
• 1.2 In case the wood stain film is in good condition. To pat the film surface with sandpaper No. 320 and clean the surface to be free from grease, dust, oil or foreign matter.
• 1.3 If in the case of rubber wood. The rubber should be wiped clean with thinner M - 77
• 1.4 Fill the hole or nail with Bayer wood filler and leave for 30 minutes, then sanded and cleaned with sandpaper.

• Can be applied without foundation

• 3.1 Mix the colors together first. and keep people in between  to optimize the best  Should use a soft brush to apply.
• 3.2 Can be applied at all without mixing with water. But if in case you want to slip the brush up  Able to mix with clean water 5 – 10% in the first trip and do not need to mix with water in the next trip.
• 3.3 Apply at least 2-3 coats for maximum efficiency of the paint film. and applying each trip  should let it dry for at least 1-2 hours before applying the next trip. Should be sanded with water sandpaper No. 280-320 along the length of the wood. until there is no splinter that is raised up  To help increase adhesion after applying, leave it for 24 hours before using the area.
• 3.4 Do not apply outdoors or in direct sunlight.