Beger Aqua Polyurethane Beger Polyurethane paint, water-based wood floor coating. Water-based polyurethane coating for wood floors Interior wood floor paint , no pungent smell, dries quickly, can be returned to use the area within 7 hours , can access the area quickly For interior wood floors. Feature : No pungent smell, safe for residents and the environment. With European standard EN 71, free of 8 hazardous heavy metals, quick drying paint film. Return to use the area within 1 day. Easy to use. No need to mix thinner. Many shades can be mixed through a color mixer. Protects the wood for more than 10 years. The film is clear and does not turn yellow even when exposed to the sun. Resistant to heat, acids, alkalis and chemicals used for cleaning. Easy to wipe clean Prevents deep stains Prevents water from seeping into the wood and prevents insect damage 100% water-based polyurethane resin from Bayer, Germany, the world's number one polyurethane technology leader. Product use process Step 1 Surface Preparation
1.1 In case the wood has been painted before and the paint film peels off or it is an old wood that has never been painted before. To sand with sandpaper until the original wood. If it's new wood, sand it to remove excess wood burrs. then clean The surface is free from grease, dust, oil or foreign matter.
1.2 If the polyurethane film is in good condition. To pat the film surface with sandpaper No. 320 and clean the surface to be free from grease, dust, oil or foreign matter.
1.3 In the case of rubber wood. Should be wiped clean with a thinner M - 77.
Step 2 Primer painting
2.1 Apply a rubber protective primer and fill the splinter groove with Bayer Sanding Sealer Water Formula AP-500 for 1 coat and leave to dry for 1 hour.
2.2 Fill the hole or nail head putty. With Bayer wood filler, leave it for 30 minutes, then polish it with sandpaper and clean it. To make the putty shade close to the wood floor. It should be putty after applying the foundation because when applying the foundation The nature of the wood will be darker.
Step 3 Paint the topcoat
3.1 Stir the colors together first and keep stirring while applying without mixing with water. Then apply with a soft brush along the length of the wood. Let it dry for at least 1-2 hours in each coat.
3.2 Before the next coat. Rub the floor with 280-320 grit sandpaper along the length of the wood until there are no raised burrs. To increase adhesion
3.3 Should apply at least 3-4 coats for the most effective paint film. and when applied over the full amount Leave it for about 24 hours before entering the area.