The number 1 selling wood stain from Beyer that has been trusted by professional carpenters for over ten years. Suitable for vertical wood work both outside and inside, such as wooden walls, laths, frames, etc. It helps prevent problems with wood deterioration, paint peeling, fungus and insect bites. Beger WoodStain will protect the wood from all weather conditions, UV protection, deep paint penetration. to the wood And adhere firmly with Super Resin, making the film flexible, not cracking. There are many shades. Translucent glossy film shows 100% wood grain. You can also be confident in the quality with TIS 1513-2554 (Do not use to paint wooden floors).
Feature : Beger wood stain, gloss film type, application area : suitable for external/interior wall of all types Both softwood and hardwood such as walls, wall cladding, door frames, windows, eaves, gables, laths, doors, fences, etc. Covering area : 70 - 80 square meters/gallon/trip Solvent : Thinner M-1199 Feature :
The color penetrates deep into the wood. hold firmly super resin Color film does not crack, does not peel off
100% translucent color film showing clear wood grain with Crystal Clear, clear shade G-1900
Excellent protection against UV rays with UV Guard.
Prevents water from entering, but the wood can still emit moisture. The paint film is flexible, so it doesn't crack and peel off.
Prevent mold and wood-eating insects
The color film is smooth, not blotchy.
safe for residents with European safety standard EN71
Product use process Step 1 Surface Preparation
1.1 In case the wood has been painted before and the paint film peels off, or it is an old wood that has never been painted before To sand with sandpaper until the original wood. If it's new wood, sand it to remove excess wood burrs. then clean The surface is free from grease, dust, oil or foreign matter.
1.2 In case the wood stain film is in good condition To pat the film surface with sandpaper No. 320 and clean the surface to be free from grease, dust, oil or foreign matter.
1.3 If in the case of rubber wood. The rubber should be wiped clean with thinner M - 77.
1.4 Fill the hole or nail head with Bayer wood filler, leave for 30 minutes, then polish with sandpaper and clean.
Step 2 Primer painting
Can be applied without foundation
Step 3 Paint the topcoat
3.1 Stir the paint thoroughly until homogeneous before use and keep stirring during application. by people from the bottom of the container to the top
3.2 Can be applied without thinner But if in the case of very hot weather should be mixed with Beger thinner M-1199 not more than 5 - 10%.
3.3 Dip the paint and wipe the paint until it is damp before applying. Do not apply with a brush that is too saturated.
3.4 Apply according to the wood grain and must be applied back and forth to allow the paint to penetrate better into the wood.
3.5 For external wood floors should be applied 3 coats, but in the case of internal wooden floors, usually only 2 coats will be applied. In which each trip is left to dry for 8-10 hours and should be applied to all sides of the wood. for the best protection