wood primer sealant You don't have to beat the crayon powder to make it difficult. enhance adhesion does not obscure the wood grain Wood primer to fill the splinter grooves B-2400. Excellent splinter filling. Can paint the topcoat smooth, clear, translucent film, clearly show the wood grain.
Feature : Excellent filling of splinter grooves and adjust the surface of the wood evenly Substitute for traditional powdering Enhance adhesion performance to the topcoat, clear, translucent film showing wood grain clearly. penetrates deep into the wood Therefore, it has a high adhesion efficiency, durable, strong, like a primer with polyurethane. Contains no nitrocellulose. Therefore, it does not cause the topcoat to turn yellow. Open the lid for immediate use Without mixing, it dries quickly and can be applied smoothly with the brush. Product use process Step 1 Surface Preparation
1.1 In case the wood has been painted before and the paint film peels off or it is an old wood that has never been painted before. To sand with sandpaper until the original wood. If it's new wood, sand it to remove excess wood burrs. then clean The surface is free from grease, dust, oil or foreign matter.
1.2 Fungal surface. The fungus must be removed completely. using bleach Then rinse with clean water. Leave to dry.
1.3 If the wood has rubber. Should be wiped clean with thinner M-77.
Step 2 Primer painting
2.1 If soft wood After surface preparation, apply Beger Wood Preservative B-6900 for fungicidal, termite, moth and wood-eating primer 1 coat, leave to dry for 1-2 hours.
2.2 Stir Beyer Woodsealer B- 2000 Apply thoroughly before and during application without thinner.
2.3 Apply one coat of Beyer Wood Sealer B-2000 Primer, leave to dry for 1-2 hours without Sanding or rubbed with sandpaper
2.4 should be stirred Beyer Wood Sealer B-2400 thoroughly before and during application without thinner
2.5 Apply Beyer Sanding Sealer splinter primer. 2 coats of B-2400 (leave approximately 1-2 hours before applying the next coat)
2.6 After Bayer Sanding Sealer B-2400 has cured, sand or decorate with sandpaper only on uneven areas.
2.7 Fill holes or nail heads with Bayer wood filler and leave for 30 minutes, then sanded and cleaned. By choosing a shade that is close to the wood.
2.8 Paint with Beger wood paint products as desired.