Beger Synotex Fiber Cement ซินโนเท็กซ์ ไฟเบอร์ซีเมนต์

Feature :
Application area : Suitable for all kinds of vertical fiber cement products. Coverage area : 40 – 45 square meters / gallon / trip
Film type : gloss/matte, translucent/opaque
Feature :
Outstanding features Beautiful color film like real wood. Resistant to scratches, UV protection from sunlight and 100% protection against water ingress, water-based formula, no pungent smell, as well as environmentally friendly and 100% user-friendly, pure acrylic, super premium grade. Provides excellent adhesion Prevent mold and algae. Beautiful color, same standard as fiber cement factory. and leading prefabricated lumber Safe from mercury, lead and free from volatile substances (LOW VOCs) can be used both outside and inside the building.

• In case the surface is new fiber cement should be cleaned The surface is free from grease, dust, oil or foreign matter and make sure the surface is completely dry. Remember during use is that there should not be more than 14%
• In case of old fiber cement surface, it should be sanded and peeled off the old paint film that has deteriorated first. A good surface preparation without any dust or shedding will give the best adhesion performance.
• In case of mold and algae surfaces, mold and algae should be cleaned first. by using a fungicide and algae Bayer Mould Free M -001 Apply or roll 1 coat to moisten without rinsing. and leave to dry for 3 hours - In case of surface cracks, ivory stripes, nail head marks and sheet joints To decorate the surface with Bayer Acrylic Filler F-200 leave 1 hours, then sanded and cleaned. Wait for it to dry completely for about 12 hours and should choose a shade that is close to Color to be applied as a topcoat
• In case of repairs or additions, the fiber cement lumber should be cut before applying the primer.

• Apply the primer as well. Synnotex Fiber Cement F-6100 Clear Film Type Apply 1 coat of fiber cement and let it dry for 2-4 hours. Tips - To apply a primer before painting the topcoat. This will help prevent water from seeping into the fiber cement surface. as well as helping to coordinate the adhesion between the surface and the topcoat, making the topcoat color closer to the natural wood

• Apply two coats of Synnotex Translucent Fiber Cement Wood Floor Paint, 4-6 hours each coat, which can add extra protection to the wood floor by applying Clear coat (TG-7000 gloss type / TM-7000 matte type)