Beger Sanding Sealer B-5000/599 (2K) Burr filler primer B-5000/599, 2-component system, excellent sealer. You don't have to beat
the crayon powder to make it difficult. enhance adhesion does not obscure the wood grain Primer to fill the grooves, B-5000/599, 2-component system, fast drying, easy to polish, enhance the adhesion of the topcoat.
Feature : Area of use : Suitable for all types of natural wood surfaces. Coverage area : 90 – 100 square meters / time / 7 liters Solvent : Beger Thinner M-50 Packing size : 2 liters (A+B) and 7 liters (A+B) Features : Filling grooves. excellent burr and adjust the surface of the wood evenly Replaces the traditional powder coating, dries quickly and is easy to polish. Enhance adhesion performance to the topcoat, clear, translucent film showing wood grain clearly. penetrates deep into the wood Therefore, it has a high adhesion efficiency, durable, strong, like a primer with polyurethane. Helps to save on topcoat Product use process Step 1 Surface Preparation
1.1 In case the wood has been painted before and the paint film peels off or it is an old wood that has never been painted before. To sand with sandpaper until the original wood. If it's new wood, sand it to remove excess wood burrs. then clean The surface is free from grease, dust, oil or foreign matter.
1.2 Fungal surface. The fungus must be removed completely. using bleach Then rinse with clean water. Leave to dry.
1.3 If the wood has rubber. Should be wiped clean with thinner M-77.
Step 2 Primer painting
2.1 If soft wood After surface preparation, apply Beger Wood Preservative B-6900 for Fungus, Termite, Moth and Wood-Eating Insect Primer 1 coat and let it dry for 1-2 hours.
2.2 Sealer B-2000 1 coat, leave to dry for 1-2 hours without scrubbing or rubbed. With sandpaper
2.3 mix Beyer Sanding Sealer System 2 parts B-5000/599 parts A to part B to thinner M-50 in the ratio of 1 : 1 : 1
2.4 Apply 1 coat, leave to dry. About 1-2 hours, then rubbed with water-grit sandpaper No. 320, then brush clean
2.5. Putty putty or nail head with Bayer wood filler, leave for 30 minutes, then polished with sandpaper and cleaned by Choose a shade that is close to the wood and apply with Beger polyurethane products such as Uniten B-52, Polyurethane B-5000, Diamond Polyurethane,