BegerCool INSULATING Primer #9000 

• Thick flexible film produced from super acrylic elastomeric
• Helps conceal cracks
• Mixture of ceramic microsphere insulating beads Provides maximum heat protection
• Resistant to alkalis and salt stains from the cement surface
• Prevent water from entering the wall
• Prevent corrosion of cement surface from pollution.

• •   Allow the cement surface to dry completely for at least 1 month and have less than 14% moisture content.

• • The area with mold or algae must be scrubbed with Bayer Mold Free M 001.

• • Before painting every time. The surface must be cleaned to be free from dust. and cement Or may use sandpaper to scrub all the dust off first. including grease and dirt stains Repair cracks on the surface with Beger Acrylic Filler No. 200 putty.

• • new elastomeric alkali resistant cement primer (High heat protection) Beyer Cool Flex No. 9000 amount 1 coat, let it dry at least 3 hours before painting the topcoat.

• • Multipurpose old cement primer paint Beger Multi-Purple Primer B-1900 1 coat, let dry at least 6-8 hours before applying topcoat. after applying can enhance thermal protection By painting over with a new elastomeric alkali resistant cement primer. (High heat protection) Beyer Cool Flex No. 9000, 1-2 coats, leave to dry at least 3 hours before painting the topcoat

• Apply topcoat, apply 2 coats of 100% acrylic water-based flexible Beyer Cool Flex (dry film thickness not less than 70 microns per coat), leaving a gap for the paint to be painted. The first coat is completely dry for 2-3 hours before applying the next coat.