Beger Primer Pro-100 เบเยอร์ ไพรเมอร์ โปร 100

Beger Primer Pro-100

• Can be applied both inside and outside the building. and give a smooth, beautiful color film Resistant to alkalinity and humidity of cement surfaces Anti-fungal and algae growth, deep penetration, excellent adhesion.

• The surface to be applied must be clean and dry. Free from grease stains, dust stains The part that is rusted, dusty or flaky. fungal surface Must be cleaned before by bleach and rinse thoroughly Allow to dry and then apply Beger Mold Free M-001. Cracked walls. Fill with Bayer Acrylic Filler F-200 for areas with cracks less than 0.3 mm in width, or use Bayer Acrylic Sealant to repair them. Cracks more than 0.3 mm and should be polished to smooth the repair before painting. A good surface preparation without dust or flaking will ensure the adhesion of the Bayer Primer Pro 100.

• Apply Beger Pro-100 Primer, new cement primer, 1 coat, no dilution required. Let it dry for at least 2 hours.

• Apply 2 coats of 100% Beger water-based acrylic paint, leaving a period of approximately 2 hours for the first coat to dry completely.